Tyton®Push-on Transition Gasket
Tyton® Push-on Joint Transition Gaskets
The TYTON® Push-On Transition Gasket is designed to be used in Tyton® joint fittings for adapting to PVC or steel pipe (IPS dimensions). TYTON® Push-On Transition gaskets are dual hardness gaskets made from vulcanized synthetic rubber, and meet the requirements of the National Sanitation Foundation (NSF) Standard ANSI/NSF-61. For applications with temperatures above 150°F, or for other special service applications, consult the table below or call your Maloney Technical Products Customer Service Representative.
Available in the following compounds:
| COMPOUNDS: | MAX SERVICE TEMPERATURE: | COMMON USES: | |||
| Water & Sewer | Air | ||||
| EPDM | 212°F | 150°F | Vegetable Oil, Alcohols, Dilute Acids, Diluted Alkalis, MEK, Acetone, fresh water, sea water, storm water, sanitary sewage & reclaimed water |
||
| Nitrile | 150°F | 125°F | Fresh water, salt water, sanitary sewage, storm water, petroleum products, oils, fats, chemicals, greases | ||
| Neoprene | 200°F | 150°F | Fresh water, salt water, sanitary sewage, storm water, greases | ||
| FKM | 212°F | 300°F | Fresh water, salt water, storm water, aromatic hydrocarbons, fuels, acids, vegetable oils, petroleum products, and most chemicals and solvents | ||
- Sizes 4″-8″
- Standard SBR made per ANSI/AWWA C111/A-21.11
DIMENSIONS FOR TYTON® PUSH-ON TRANSITION GASKETS
| Size | A | B | C |
| 4″ | 5.74 | 4.26 | 1.51 |
| 6″ | 7.86 | 6.38 | 1.62 |
| 8″ | 10.15 | 8.31 | 1.94 |
Call Maloney Technical Product Customer Service Representative with the project specifications for recommendation on best compound to use for a
special application, current lead times and for pricing. Maloney maintains inventory on many of the sizes and special compound
